Valve Timing
-
- Member
- Posts: 7
- Joined: Mon May 02, 2022 6:10 pm
- Location: Devon UK
Valve Timing
Refitting the cams on a 51 G80 ,the exhaust cam has 2 Mark's...fine but the inlet cam has 3 not sure which ones to us .......any idea's?
- Duncan
- Member
- Posts: 2118
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: Valve Timing
Hi Tony, this should help you:
https://www.jampot.com/article_read.asp?id=652
Its in the Technical Articles Directory on the main site:
Home >> Articles >> Technical Tips >> Singles >> Cams - joining the dots
https://www.jampot.com/article_read.asp?id=652
Its in the Technical Articles Directory on the main site:
Home >> Articles >> Technical Tips >> Singles >> Cams - joining the dots
-
- Member
- Posts: 7
- Joined: Mon May 02, 2022 6:10 pm
- Location: Devon UK
Re: Valve Timing
Thanks Duncan ,the problem is the inlet cam has 3 Mark's one at about 2 o'clock as stated but then 2 more only 1 tooth apart so not sure which is correct
- Duncan
- Member
- Posts: 2118
- Joined: Thu Jul 10, 2003 1:00 am
- Location: HAMPSHIRE UK
Re: Valve Timing
Hi Tony, I should have looked in detail I thought it covered three dots, have a look at page 64 & 65 here: http://archives.jampot.dk/book/Workshop ... dition.pdf
-
- Member
- Posts: 7
- Joined: Mon May 02, 2022 6:10 pm
- Location: Devon UK
Re: Valve Timing
Thanks Duncan , I think that makes sense