Butyeah, I read it as Thrifty carb with Nicks jets needed Pilot to be all the way in then 1/8 out. Nick's carb gets tempted with the Pilot screw all the way in. So there must still be a blockage.SPRIDDLER wrote: ↑Mon May 16, 2022 7:37 pmYebbut, (edit: not Neil) Nick said that it wasn't any better after fitting Thrifty Peter's carb which definitely didn't have any blockages.jackstringer wrote: ↑Mon May 16, 2022 5:57 pm Clean the carb in an Ultrasonic cleaner as that might remove some of the random crap in the holes.
Also, clean the jets in the ultrasonic as there maybe some crap in there. If in doubt buy some new jets.
(We seem to be going around in circles with this one).
Anyway, everyone needs an ultrasonic bath big enough to get their bits in.