BASKET CASE !
- db133
- Posts: 187
- Joined: Sat Sep 06, 2008 9:50 am
- Location: - select State -sussex UK
BASKET CASE !
Been looking for a long time for any information on
" Early clutch baskets had loose friction inserts retained within the chainwheel assembly. "
where is the information relating to this I am now bewildered
I just wanted to find infomation clutch basket reline service ?
but the above infers they are 'loose' so where are they to purchase ?
Page 49 7 next page of the 57-64 of the service manual has pictures of early and late clutches
is this correct ?
Are the service manauals on the site for reference ?
where do I find my menbership number and help ?
" Early clutch baskets had loose friction inserts retained within the chainwheel assembly. "
where is the information relating to this I am now bewildered
I just wanted to find infomation clutch basket reline service ?
but the above infers they are 'loose' so where are they to purchase ?
Page 49 7 next page of the 57-64 of the service manual has pictures of early and late clutches
is this correct ?
Are the service manauals on the site for reference ?
where do I find my menbership number and help ?
- dave16mct
- Member
- Posts: 3245
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: BASKET CASE !
Yes the inserts in the chainwheel are loose. I don't know of anywhere that sells them You could make them from a cork tile or other friction material or you could convert to the later clutch. The picture in the manual are correct of course. They show the 2 types, one has tangs on the outside, the other has the tangs on the inside.
Manuals here: http://archives.jampot.dk/book
Dave
Manuals here: http://archives.jampot.dk/book
Dave
- dave16mct
- Member
- Posts: 3245
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: BASKET CASE !
To find your membership number, go to Jampot.com, click on 'member's. click 'my profile'.
Dave.
Dave.
- db133
- Posts: 187
- Joined: Sat Sep 06, 2008 9:50 am
- Location: - select State -sussex UK
-
- Member
- Posts: 1581
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: BASKET CASE !
membership number is on the address label on Jampot each month, alternatively you can ask the membership secretary (me) on membership@jampot.com . in this case i will pm you your number in case you cant find it . Peter
- db133
- Posts: 187
- Joined: Sat Sep 06, 2008 9:50 am
- Location: - select State -sussex UK
Re: BASKET CASE !
db133 wrote: ↑Sat Sep 25, 2021 12:57 pm Been looking for a long time for any information on
" Early clutch baskets had loose friction inserts retained within the chainwheel assembly. "
then found this ....
https://www.rgmnorton.co.uk/buy/clutch- ... 12_901.htm
- Rob Harknett
- Member
- Posts: 11211
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: BASKET CASE !
If the inserts you want are the same size as in a clutch friction plate, you could get a new friction plate from the club, cheaper than the inserts you found.
- les ward
- Member
- Posts: 380
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WILTSHIRE UK
Re: BASKET CASE !
I got the inserts from Supreme Motorcycles, Leicester. But that was a long time ago (15/20 years). Worth checking to see if they still have some.
-
- Member
- Posts: 3365
- Joined: Wed Oct 12, 2005 10:45 pm
- Location: N YORKS UK
Re: BASKET CASE !
I still have my original membership number, three figures, but the record does not reflect the actual length of membership. Don't know why. Don't really care.
Just a thought.
Johnny B
Just a thought.
Johnny B
- GOLDSTAR
- Member
- Posts: 2521
- Joined: Thu Sep 11, 2003 1:00 am
- Location: KENT UK
Re: BASKET CASE !
I had a similar problem damn things just kept falling out should I remove the clutch, an Aussie member suggested I visit the local tractor supplier etc; and source a couple of PTO take off clutches, turn 'em to fit and araldite them each side of the chainwheel, I did this, had to sort out thickness and diameter of course on the lathe but I havn't had an iota of a problem with the clutch since.
kind rergards
kind rergards