Hi
Im converting my 1952 ajsi c16ms to electronic ignition.
A strobe light is recommended for final setup.
All strobe lights i have seen specify 12v.
My bike is 6v
My question is :-
Will a 12v strobe light work on my bikes 6v battery or will i have to use a 12v remote battery ?
Cheers
Mavs
6v strobe
-
- Member
- Posts: 1580
- Joined: Mon Jan 01, 1990 12:00 am
- Location: WEST SUSSEX UK
Re: 6v strobe
usually it needs they 12V , just connect to car battery . mine only works with above about 11V to the strobe
-
- Posts: 10
- Joined: Mon Apr 19, 2021 3:25 pm
- Location: Surrey UK
Re: 6v strobe
Cheers. Thanks for the prompt reply.
I'll run it off my other bike's battery.
I'll run it off my other bike's battery.
-
- Member
- Posts: 24
- Joined: Mon Jan 01, 1990 12:00 am
- Location: MIDDLESEX UK
Re: 6v strobe
If you look on various web sites you can find small electronic convertors that make 12v from 6v , you will need to find the power consumption of the strobe first though to get a suitable one.I used one for my 12v Garmin (an old one before USB 5v power) and it still works fine.
But as you normally do the job in the garage a 12v battery is often to be found somewhere.
John B.
But as you normally do the job in the garage a 12v battery is often to be found somewhere.
John B.
-
- Member
- Posts: 8559
- Joined: Wed Sep 01, 2004 1:00 am
- Location: WEST SUSSEX UK
Re: 6v strobe
I've run my strobe off my 12v battery charger as the strobe requires very little current.
'There is a tide in the affairs of men
Which taken at the flood............'
Which taken at the flood............'