Engine breather
-
- Member
- Posts: 60
- Joined: Mon Sep 21, 2020 10:47 pm
- Location: Lincolnshire UK
Engine breather
I would be most grateful if someone could advise as to whether engine breather (bolt relief valve assembly) part number 016673/4 will fit my 1956 model 30
- dave16mct
- Member
- Posts: 3234
- Joined: Mon Jan 01, 1990 12:00 am
- Location: LANCASHIRE UK
Re: Engine breather
Yes, if your model 30 has the shock absorber spring on the crankshaft that relief valve assembly will fit. Check in the parts list here: http://archives.jampot.dk/book/Spares_l ... s_List.pdf
Dave.
Dave.
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Engine breather
Its listed for a single
- ajscomboman
- Member
- Posts: 3963
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Engine breather
Where? Not on our parts service page Rob.
-
- Member
- Posts: 60
- Joined: Mon Sep 21, 2020 10:47 pm
- Location: Lincolnshire UK
Re: Engine breather
Now I am confused !!!!
- Rob Harknett
- Member
- Posts: 11236
- Joined: Mon Jan 01, 1990 12:00 am
- Location: ESSEX UK
Re: Engine breather
Don't know where I got that from Rob. Must have been looking in a twins parts list thinking it was a singles parts list.
I'm loosing my ability to concentrate, keep an eye on me please. Hope you are now no longer confused Chris.
-
- Member
- Posts: 60
- Joined: Mon Sep 21, 2020 10:47 pm
- Location: Lincolnshire UK
Re: Engine breather
Just got it today what a fantastic service from the club spares scheme. Many thanks
- ajscomboman
- Member
- Posts: 3963
- Joined: Mon Jan 01, 1990 12:00 am
- Location: HAMPSHIRE UK
Re: Engine breather
Just make sure the outer nut is tight before finally buttoning up the chaincase.