New front wheel bearings now available!
- vincentvv
- Posts: 380
- Joined: Sat Jun 21, 2014 1:17 pm
- Location: Belgium
Re: New front wheel bearings now available!
Can anyone give me the outside/inside and wide of the bearings? In my line of work I often meet people from SKF. I am sure I can find those bearings cheaper.
Not fired is always a misser!
- Pharisee
- Member
- Posts: 1126
- Joined: Tue Mar 15, 2016 8:51 pm
- Location: Lincolnshire UK
- Contact:
Re: New front wheel bearings now available!
The bearings on my new axle assembly from Vintage Bearings:-
Inside diameter 0.750"
Outside diameter 1.500"
Total width of bearing 0.680" (edge of inner ring to edge of outer ring)
Measured with a vernier caliper, not a micrometer. so for guidance only!!
Inside diameter 0.750"
Outside diameter 1.500"
Total width of bearing 0.680" (edge of inner ring to edge of outer ring)
Measured with a vernier caliper, not a micrometer. so for guidance only!!
I'm from the Fens.... Gimme six.
- vincentvv
- Posts: 380
- Joined: Sat Jun 21, 2014 1:17 pm
- Location: Belgium
Re: New front wheel bearings now available!
Any article numbers to be found on this bearing? Timken made I see?
Not fired is always a misser!
- Pharisee
- Member
- Posts: 1126
- Joined: Tue Mar 15, 2016 8:51 pm
- Location: Lincolnshire UK
- Contact:
Re: New front wheel bearings now available!
No numbers or any other information on the bearings. The inner ring is pressed up to a shoulder on the axle so maybe a number there but I'm not about to hammer it off!!vincentvv wrote:Any article numbers to be found on this bearing? Timken made I see?
I'm from the Fens.... Gimme six.
-
- Posts: 291
- Joined: Sat Jan 14, 2017 11:48 am
- Location: WEST MIDLANDS UK
Re: New front wheel bearings now available!
There were markings on mine, but not ledgable.